學習經曆：
2012.09-2018.12 南京工業大學 機械與動力工程學院 化工過程機械 博士
2008.09-2012.06 南京工業大學 機械與動力工程學院 過程裝備與控制工程 學士
工作經曆：
2019.03-至今 江蘇大學 土木工程與力學學院 講師

論文
[1] Jian Li*, Chang-Yu Zhou, Jian-Guo Zhu*, Xiao-Yu Wang. Creep analyses for pipe bends under combined internal pressure and bending loads. International Journal of Pressure Vessels and Piping 2021; 193: 104450.
[2] Wen-Jie Qian, Hui-Ying Zhang, Jian-Guo Zhu*, Jian Li*, Jian Zhang, Mu-Yu Zhang. Determination of fracture toughness of polymer coating using micro-scale digital image correlation technique. Polymer Testing 2021; 93: 106896.
[3] Jian Li*, Chang-Yu Zhou, Jian-Guo Zhu*. Limit loads for 180° pipe bends under in-plane bending moment considering geometric nonlinearity. International Journal of Pressure Vessels and Piping 2020; 183: 104100.
[4] Wen-Jie Qian, Jian Li, Jian-Guo Zhu*, Wen-Feng Hao*, Lei Chen. Distortion correction of a microscopy lens system for deformation measurements based on speckle pattern and grating, Optics and Laser in Engineering 2020; 124: 105804.
[5] Jian Li, Chuan-Yi Su, Lei Lu, Peng Zhang, Le Chang, Xin-Ting Miao, Bin-Bin Zhou, Xiao-Hua He, Chang-Yu Zhou*. Investigation on fatigue crack growth behavior for commercial pure titanium at different crack tip plastic deformed levels. Theoretical and Applied Fracture Mechanics 2019; 100: 1-13.
[6] Jian Li, Peng Zhang, Lei Lu, Fei Lv, Xin-Ting Miao, Le Chang, Bin-Bin Zhou, Xiao-Hua He, Chang-Yu Zhou*. Effect of pre-strain on fatigue crack growth behavior for commercial pure titanium at ambient temperature. International Journal of Fatigue 2018; 117: 27-38.
[7] Jian Li, Lei Lu, Peng Zhang, Xin-Ting Miao, Le Chang, Bin-Bin Zhou, Yuan-Zhe Wang, Xiao-Hua He, Chang-Yu Zhou*. Effect of cold creep on fatigue crack growth behavior for commercial pure titanium. Theoretical and Applied Fracture Mechanics 2018; 97: 177-188.
[8] Jian Li, Chang-Yu Zhou*, Le Chang, Xin-Ting Miao, Xiao-Hua He. Limit loads for un-cracked and circumferential through-wall cracked pipe bends under torsion moment considering geometric nonlinearity. Thin-Walled Structures 2017; 116: 37-52.
[9] Jian Li, Chang-Yu Zhou*, Xin-Ting Miao, Le Chang, Xiao-Hua He. Plastic limit loads for pipe bends with circumferential through-wall crack under torsion moment. International Journal of Mechanical Sciences 2015; 100: 283-297.
[10] Jian Li, Chang-Yu Zhou*, Peng Cui, Xiao-Hua He. Plastic limit loads for pipe bends under combined bending and torsion moment. International Journal of Mechanical Sciences 2015; 92: 133-145.
[11] Jian Li, Chang-Yu Zhou*, Ji-Lin Xue, Xiao-Hua He. Limit loads for pipe bends under combined pressure and out-of-plane bending moment based on finite element analysis. International Journal of Mechanical Sciences 2014; 88: 100-109.
[12] Le Chang, Bin-Bin Zhou, Tian-Hao Ma, Jian Li, Xiao-Hua He, Chang-Yu Zhou*. Comparisons of low cycle fatigue behavior of CP-Ti under stress and strain-controlled modes in transverse direction. Materials Science and Engineering A 2019, 746: 27-40.
[13] Le Chang, Bin-Bin Zhou, Tian-Hao Ma, Jian Li, Xiao-Hua He, Chang-Yu Zhou*. The difference in low cycle fatigue behavior of CP-Ti under fully reversed strain and stress controlled modes along rolling direction. Materials Science and Engineering A 2019, 742: 211-223.
[14] Le Chang, Chang-Yu Zhou*, Hong-Xi Liu, Jian Li, Xiao-Hua He. Orientation and strain rate dependent tensile behavior of single crystal titanium nanowires by molecular dynamics simulation. Journal of Materials Science & Technology 2018; 34(5): 864-877.
[15] Xin-Ting Miao, Qin Yu, Chang-Yu Zhou*, Jian Li, Yuan-Zhe Wang, Xiao-Hua He. Experimental and numerical investigation on fracture behavior of I-II mixed mode crack for commercially pure Titanium. Theoretical and Applied Fracture Mechanics 2018; 96: 202-215.
[16] Xin-Ting Miao, Qin Yu, Chang-Yu Zhou*, Jian Li, Yuan-Zhe Wang, Xiao-Hua He. Experimental and numerical investigation on fracture behavior of CTS specimen under I-II mixed mode loading. European Journal of Mechanics/A Solids 2018; 72: 235-244.
[17] Shun-Jie Li, Chang-Yu Zhou*, Jian Li, Xiang-Ming Pan, Xiao-Hua He. Effect of bend angle on plastic limit loads of pipe bends under different load conditions. International Journal of Mechanical Sciences 2017; 131-132: 572-585.

1. 2019年9月，中國杭州，參加2019年中國力學大會，做中文報告.
2. 2018年11月，中國南京，參加2018年國際結構完整性會議 (2018 International Symposium on Structural Integrity-ISSI2018)，做英文報告.
3. 2017年5月，英國曼徹斯特，參加第14屆工程結構完整性評估暨2017國際結構完整性會議(Engineering Structural Integrity Assessment-ESIA14, in conjunction with the 2017 International Symposium on Structural Integrity-ISSI2017)，做英文報告.
4. 2016年7月，加拿大溫哥華，參加2016年美國機械工程師協會舉辦的國際壓力容器與管道會議(The 2016 ASME Pressure Vessels and Piping Conference)，做英文報告.
5. 2015年9月，中國上海，參加第14屆國際壓力容器技術會議(The 14th International Conference on Pressure Vessel and Technology)，做英文報告.